Xerox 4112-4127 Enterprise Printing System-192 User Manual
Page 85
PDL principles and procedures
Using LCDS Print Description Language
1-59
Recommended: Do the following when you are coding
catalog commands.
•
Place a comment on the line above the first CATALOG
command line, indicating that the following commands are
catalog level.
•
Place the catalog identifier, followed by a colon (:) and the
CATALOG keyword, at the left margin, aligned with the
system level identifiers.
•
On the command lines following the catalog identifier line,
tab or space over about 10 character spaces to enter the
rest of the catalog level command keywords.
8. Code the first JDE identifier, followed by a colon (:) and the
JDE keyword. The JDE name must be one to six characters
long.
NOTE: If the JDE uses a catalog, enter the
INCLUDE=catalogname command following the JDE
identifier on the same line, with the semicolon (;) following the
catalog name. For example:
2: JDE INCLUDE=CATPOW;
Recommended:
•
Place a comment on the line above the first JDE
command line, indicating that the following commands are
JOB or JDE level.
•
Tab or space over approximately 10 character spaces to
enter the job identifier, followed by a colon (:) and the JDE
keyword.
9. Code the JDE level commands for the first job in the JSL.
Recommended: On the command lines following the JDE
identifier line, tab or space over about 15 character spaces to
enter the rest of the JDE level command keywords for that
job.
10. Repeat steps 8 and 9, above, for each additional JDE that
you want to specify.
11. Enter the END; command to complete the JSL.
12. When you have completed entering all the necessary
commands and parameters, select [Save As] from the File
menu on the Text Editor window menu bar. The Text Editor –
Save As window appears.