Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 286)

Specifying print format parameters
4-46 Using LCDS Print Description Language
Default NONE
OUTPUT BINDING
Specifies printing for long edge or short edge binding. Causes
the page to be rotated to orient it correctly for binding by a
finishing device on the long or short edge.
Syntax OUTPUT BINDING = {LONG | SHORT}
Options
Default LONG
OUTPUT BINDING
parameter: point
to note
The following figure shows the output using two-hole drilled long
edge feed paper with short edge binding.
NONE Specifies that no form is to be added to the associated report page of variable
data.
inkref Ink reference.
Identifies the inks that override the corresponding inks that are specified in the
ink list of the form. If a form does not contain an ink list, the form is printed in
black.
Table 4-43. BFORM parameter options and definitions (Continued)
Option Definition
Table 4-44. OUTPUT BINDING parameter options and definitions
Option Definition
LONG Rotates the sheet so that binding space will occur along the long edge of the
printed page.
SHORT Rotates the sheet so that binding space will occur along the short edge of the
printed page.