Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 119)

Specifying input parameters
Using LCDS Print Description Language 2-11
As before, volume 1 is the start-of-job, and the volume
specified by n is the volume that contains data for the last
page that was written to the print file before the system
rollover.
Input processing command descriptions
The basic PDL commands to control input processing are
CODE, PCC, RECORD, SEFFNT, TCODE, and VOLUME,
which are defined here. The “Using logical processing” section
defines commands that specify logical functions that may be
performed on either a record or page basis.
The input related PDL commands are summarized in the
following table.
Table 2-3. Summary of PDL commands associated with input
processing
Command Function
BLOCK command Describes input block characteristics
CODE command Defines the input character code translation table.
DBCODE command Defines an input double-byte character code translation table.
IDEN command Indicates that the report contains DJDEs.
KCODE command Defines an input double-byte character code translation table.
PCC command Defines printer carriage control table.
RECORD command Specifies the input data record characteristics.
SEFFNT command Defines font mapping for short edge feed jobs.
TCODE command Defines masked comparison type assignments for translation.
VOLUME command Specifies input medium characteristics.