Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 382)

Using Dynamic Job Descriptor Entries (DJDEs)
5-28 Using LCDS Print Description Language
Options
FILE DJDE
Enables you to load files to the system disks while a print job is in
progress. The print job may be invoked solely for the purpose of
downloading permanent files. (Although intended primarily for
use with online systems, this DJDE is not restricted to online
use.)
Type Record oriented
Syntax FILE = ([filename] [[, filetype] [[, f] [[, s] [[, n]]]])
Options
Table 5-22. GDATA DJDE options and definitions
Option Definition
offset The starting point within the record of the file data that will be downloaded.
termination The terminating byte of the record. The options are:
•
DEFAULT
–
If online, a single terminating byte exists.
– If offline, no terminating byte exists.
• n: The number of terminating bytes that exist
Table 5-23. FILE DJDE options and definitions
Option Definition
filename A 1 to 6 character name used to identify the downloading file.
In this option, lowercase characters a through z are converted to
uppercase before use.
filetype A 3 character file extension identifier, indicating the type of file being
downloaded.
In this option, lowercase characters a through z are converted to
uppercase before use.
f File input format parameter. The only parameter that is supported for the
DP 2000 Series EPS is as follows:
L = LPS labeled tape format
The default file input format is L.
s One of the following file storage parameters:
•
D = Delete after report printed
• P = Permanent
The default file storage is P.