Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 23)

Using LCDS Print Description Language xxiii
Introduction
Using LCDS Print Description Language provides information on
how to use PDL to program LCDS job descriptions that can be
used on any Xerox FreeFlow Print Server-based printing system
featuring LCDS. Examples of these systems include, but are not
limited to: the Xerox DocuPrint 75/90 and 100/115/135/155/180
Enterprise Printing Systems, the DocuPrint 75 MX, the Xerox
DocuTech 128/155/180 HighLight Color Printing System, and
the Xerox Nuvera 100/120 family of printing systems.
Contents
Before using this documentation, become familiar with its
contents and conventions.
The topics discussed in this guide include:
•
Explanation of a Job Source Library (JSL), including required
and optional commands and components
• Rules and guidelines for coding LCDS PDL commands
• Procedures for creating and compiling a JSL
• Syntax and explanation of each LCDS PDL command,
parameter, and DJDE
• Explanation of Dynamic Job Descriptor Entries (DJDEs) and
the process for inserting them into the data stream
• Reference list of all PDL and DJDE commands, including
online and offline usage, parameters, and the Xerox printing
systems that support them
A glossary and index are also provided.
Focus of this
guide
This documentation describes LCDS Print Description Language
as it applies to the DocuPrint 100/115/135/155/180 and 75/90
EPS, and the DocuPrint 75 MX. Except where otherwise noted,
the PDL information contained in this documentation also applies
to the following families of Xerox Laser Printing Systems that
print LCDS data: