Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 133)

Specifying input parameters
Using LCDS Print Description Language 2-25
IDEN command parameters
IDEN DJPCC
(DJDE Printer Carriage Control) Defines the processing of
carriage control for DJDE records found in the data stream.
Syntax IDEN DJPCC= {DEFAULT | PROCESS | IGNORE}
Options
Default DEFAULT
Table 2-22. Summary of IDEN command parameters
Parameter Specifies Online Offline DJDE
IDEN DJPCC Specifies processing of carriage control for DJDE
records. Y Y N
IDEN OFFSET Specifies the starting position of the prefix string. Y Y N
IDEN OPRINFO Specifies whether the DJDE record is printed and
delivered to the stacker. Y Y N
IDEN PREFIX Specifies a character string that appears in the
DJDE record identification part. Y Y N
IDEN SKIP Specifies the starting position of the first DJDE
command. Y Y N
Table 2-23. IDEN DJPCC options and definitions
Option Definition
DEFAULT Specifies that, for online printing, the ‘channel skip’ portion of the carriage
control will be applied, whereas the ‘print’ and ‘space’ portions will not. (Refer to
the PCC ASSIGN parameter section in this chapter for further information on
carriage control.)
For offline printing, this option specifies that all PCCs in the DJDE records will
be ignored.
PROCESS Specifies that carriage control information for all DJDE records will be valid for
both online and offline printing.
IGNORE Causes all carriage control information to be ignored for both online and offline
printing.