Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 419)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-65
Options
SEFMAP DJDE: points to note
• UPD and REP options affect only memory resident font
mapping tables (not disk resident tables such as those found
in JDLs).
• If you want to use 11 by 17 inch, A4, or any size paper that
requires short edge feed, be aware that the system does not
scale or rotate form, logo, and image files. The graphic file
must be created in the desired orientation.
• A SEFMAP DJDE that is in the data stream is processed
whether or not the JDL contains short edge feed commands.
SEFMAP DJDE examples
Following are examples of how the SEFMAP DJDE works.
Example 1:
SEFMAP=((font1,font7), (font5,font6),UPD);
Before the SEFMAP DJDE shown above was encountered, the
contents of the memory font mapping table were:
((font1,font2), (font3,font4))
After the SEFMAP DJDE is processed, the contents of the
memory font mapping table are:
((font1,font7), (font3,font4), (font5,font6))
Table 5-54. SEFMAP DJDE options and definitions
Option Definition
(font
1
, font
2
) Font pair, where font
2
is the SEF mapping for font
1
.
(font
m
, font
n
) Font pair, where font
n
is the SEF mapping for font
m
.
UPD UPDATE
Indicates that the specified font pairs change existing font mappings or
appending new mappings to the current font mapping table.
REP REPLACE
Indicates that the specified font pairs create a new mapping table to replace
the current one.
NONE Disables short edge feeding (SEF) and font mapping (stops a previous
SEFFNT specification).