Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 215)

Using logical processing
Using LCDS Print Description Language 3-35
Figure 3-3. Data record showing offset specified in RAUX
command
The data record, when processed as part of the input data
stream, causes the page it is a part of to be printed on a sheet of
paper fed from the auxiliary tray. The Xs are depicted in the
above example only to illustrate the specified offset of 20
character positions.
RDELETE and RSELECT commands
Records that are interspersed throughout one report or file may
be either deleted or selected for printing by the RDELETE and
RSELECT commands, respectively. These commands can also
be used to selectively delete specialized records; for example,
control records and offset records that are on the data tape but
are not printed.
If the tests for both RSELECT and RDELETE are satisfied, the
records are deleted.
The following section describes the syntax of the RDELETE and
RSELECT command parameters and explains their options.
RSELECT and RDELETE TEST parameter
Defines the test expression for selection (RSELECT) or deletion
(RDELETE) of records for printing.
Syntax RDELETE TEST = testexp
RSELECT TEST = testexp