Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 371)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-17
Syntax BATCH = {START | END}
Options
BATCH DJDE: points to note
• The BATCH DJDE is supported for online Batch mode jobs
only.
• This DJDE must be used precisely to mark the beginning and
ending of online Batch mode data.
– The first graphic (or IMAGE DJDE) must be preceded
immediately by a BATCH=START DJDE.
– The last graphic must be followed immediately by a
BATCH=END DJDE.
• The BATCH DJDE, when specified, must be the only DJDE in
the packet.
BEGIN DJDE
Specifies the location of the starting print line of a logical page.
Type Page oriented
Syntax BEGIN = (vpos [units], hpos [units])
Table 5-9. BATCH DJDE options and definitions
Option Definition
START Marks the beginning of online Batch mode data.
END Marks the end of online Batch mode data.