Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 368)

Using Dynamic Job Descriptor Entries (DJDEs)
5-14 Using LCDS Print Description Language
The following table lists record oriented DJDEs that are used
with graphics.
DJDE descriptions
The following sections give the definition, syntax, and options for
each available DJDE.
ALTER DJDE
Specifies new imaging parameters for graphics previously
referenced using the HOLD (automatic reimaging) parameter.
Type Record oriented graphic
Syntax ALTER = (name, vpos [units], hpos [units] [, n [/d]] [, (INK[S],
inkref
1
[, inkref
2
]...)])
Table 5-6. Record oriented DJDEs for graphics
DJDE Function
ALTER Specifies the new imaging parameters for graphics.
BATCH Delimits Batch mode graphic data to permit normal processing of online banner
pages for Batch mode jobs.
CANCEL Cancels the hold specified by the H parameter in a GRAPHIC or IMAGE DJDE.
FDATA Specifies the offset of the starting point of file data from the beginning of the
user portion of the record.
GDATA Specifies the offset of the starting point of graphic data from the beginning of
the user portion of the record.
GRAPHIC Specifies that the DJDE is a graphic sentinel.
SAVE Specifies that image (.IMG) files that were updated during the current report will
not be purged when processing of the report is complete.