Xerox 4112-4127 Enterprise Printing System-192 User Manual
Page 457
PDL command quick reference
Using LCDS Print Description Language
B-5
LINE
LINE BASELINE = {TOP | LARGE[ST] | CENTER | BOTTOM}
—
LINE BLANKTYPE = {SPACE | NOSPACE}
NOSPACE
LINE DATA = (pdo, length)
offline: 1,134;
online: 0,150
LINE FCB = {IGNORE | PROCESS}
PROCESS
LINE FDATA = (offset, termination)
0, DEFAULT
LINE FONTINDEX = {offset | offset ([,initval][, bitopt]) | NONE}
NONE
LINE GDATA = (offset, termination)
0, DEFAULT
LINE INKINDEX = {offset | offset ([, initval][, bitopt]) | NONE}
NONE
LINE LPI = {(linespacing {LPI | DOTS | XDOTS}) | (linespacing
{LPI | DOTS | XDOTS}, lineno, (...))}
—
LINE MARGIN = {value | (value, valuetype)}
1, POS
LINE OVERPRINT = (overopt, disp)
PRINT, NODISP
LINE PCC = (offset, transtype)
0,NOTRAN
LINE PCCTYPE = {PCCname | PCCid | USER}
offline: ANSI
online: IBM4245
LINE UCSB = {IGNORE | PROCESS}
PROCESS
LINE VFU = {VFUid | NONE}
NONE
LMODIFY
LMODIFY = TEST
—
MESSAGE
MESSAGE ITEXT = {sc | (sc, passnum) | NONE | WAIT}
NONE
MESSAGE OTEXT = {sc | (sc [, passnum]) [,WAIT] | sc [, END]
[, WAIT] | NONE}
NONE
Table B-2. PDL command quick reference table (Continued)
Command
Syntax
Default