Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 389)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-35
When FONTINDEX is specified, the line spacing of the first
line of a report is determined by the font indicated by the font
index value in the first line of the report. If there is no font
index value in the record and FONTINDEX is specified, the
line spacing for the first line of the report is determined by the
first font in the PDE.
When the FONTINDEX or CMEs are specified, the line
spacing of the first line of subsequent pages is determined by
the line spacing of the font called out by the last font index of
the previous page applied to the current font list.
If a FORMAT DJDE has occurred before the page transition,
the font used for the line spacing comes from this list.
FONTS DJDE
Specifies the fonts to be used in printing variable input data or
CME data.
Type Page oriented
Syntax FONTS = {(f
1
[, f
2
] [,...]) | ((f
1
, s
1
[, unit]) [, (f
2
, s
2
[, unit])] [, ...])} or
FONTS = (sbf [, s
1
[unit]]) [, ...] [(dbf [*vn [*hn]] [, s
1
[unit]] [, {Ai |
DBi | Ki}] [, c
1
[unit]]) [, ...]])
Options
Table 5-25. FONTS DJDE options and definitions
Option Definition
f font.
Specifies a one to six alphanumeric character identifier (consisting of at least
one letter) corresponding to a font catalogued on the system disk.
sbf single byte font.
Specifies a one to six alphanumeric character identifier (consisting of at least
one letter) corresponding to a single byte font catalogued on the system disk.
dbf double byte font.
Specifies a one to six alphanumeric character identifier (consisting of at least
one letter) corresponding to a double byte font catalogued on the system disk.
i index.
Specifies the font index for a double byte character set. Can be 1 through 8.