Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 254)

Specifying print format parameters
4-14 Using LCDS Print Description Language
CME CONSTANT
Specifies a character string to print.
Syntax [ac:] CME CONSTANT = sc
Options
Default No default
CME CONSTANT
parameter: point
to note
The CONSTANT parameter of the CME has no default and must
be specified, unless all that is required is a font change in the
variable data.
CME FONT
Specifies a value to be used as an index into the font list (as
specified by the PDE command or a DJDE). The selected font is
used when imaging the input data or CME data. (A PDE
command is selected by the FORMAT parameter of the
OUTPUT command.)
Syntax [ac:] CME FONT = value
Option
Table 4-15. CME CONSTANT parameter options and definitions
Option Definition
sc string constant.
Represents the character string to be printed. The width of the copy
modification rectangle is determined by the number of characters
specified by sc.
More than one string constant is allowed.
Table 4-16. CME FONT parameter option and definition
Option Definition
value May range from 1 to n, where n is the number of different fonts specified
by the FONTS parameter of the PDE command.
A value of 1 specifies the first font in the PDE FONTS parameter, 2 the
second, and so forth.
The default for a value is the current font (specified with the last FONT
parameter; initially the value is 1).