Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 67)

PDL principles and procedures
Using LCDS Print Description Language 1-41
Figure 1-8. Command override sequence
User interface
window overrides
Some PDL commands and DJDEs that are specified in the JSL
can be overridden by queue properties that have been selected
on user interface queue management windows.
•
Quantity: The highest priority override is the Quantity (copy
count) specification that can be set on the Queue Manager or
the Online Manager window. This parameter must be set
before the job is decomposed.
• Late binding attributes: Other specifications are known as
“late binding attributes” or “post scheduling properties” of the
queue, because they are implemented after the job has been
sent to a queue and scheduled for printing. The procedure for
setting late binding attributes is described in the next section.
Setting late
binding attributes
In order for late binding attributes to take effect in the jobs you
are printing, you must do the following for the queue that will be
used:
1. On the Print Services window, click the [Queue Manager]
icon. The queue list is displayed.