Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 222)

Using logical processing
3-42 Using LCDS Print Description Language
ROFFSET command example
In the following example, a file has multiple reports without any
delimiter records separating the reports. Each page of the report
has a page number as part of the heading. Each report causes
renumbering of the pages, starting with PAGE...1. With the
ROFFSET command coded below, an offset occurs for all
passes of the reports. Therefore, the first sheet of each report is
offset relative to the previous sheet, because each first sheet
contains records with the “Page...1” text.
The following figure shows a sample job diagram showing
ROFFSET command usage.
Figure 3-5. Diagram of a sample ROFFSET command
1. Tape mark
2. Pages
3. Tape mark
4. Reports
T1: TABLE CONSTANT=('PAGE...1');
C1: CRITERIA CONSTANT=(105,8,EQ,T1);
ROFFSET TEST=C1, PASSES=ALL;