Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 299)

Specifying print format parameters
Using LCDS Print Description Language 4-59
Options
Default The first ink that is referenced in the IDR ILIST parameter in
effect at the start of the page. If no IDR is specified, the default
ink is BLACK.
OUTPUT IDFAULT
parameter
example
OUTPUT IDFAULT=’RED’
OUTPUT IDR
Specifies the ink descriptor that will be used for the job. Refer to
the “IDR command” section earlier in this chapter for information
on what is defined in an IDR.
Syntax OUTPUT IDR = idrname
Options
Default DFIDR.IDR
OUTPUT IDR
parameter
example
OUTPUT IDR=IDR1
Table 4-57. OUTPUT IDFAULT parameter options and definitions
Option Definition
‘inkref’’ ink reference
The default ink that will be used for all subsequent parameters that do not
specify a colored ink.
Table 4-58. OUTPUT IDR parameter options and definitions
Option Definition
idrname ink descriptor reference name
The name of the IDR (previously defined by an IDR command in the JSL) that
will be used for the job.