Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 318)

Specifying print format parameters
4-78 Using LCDS Print Description Language
OUTPUT SF2FUNCTION
Specifies to the third party finisher whether or not it should
perform the user-defined SF2 operation on the current report.
This parameter provides control over third party finishing devices
that conform to the DFA standard. You use it to invoke Finishing
Function SF2 through the DFA channel C7. The user must
specify what function SF2 will have. Refer to your finishing
equipment vendor documentation for information on what
function should be specified for your finisher.
Syntax OUTPUT SF2FUNCTION = {NO | YES}
Options
Default NO
OUTPUT SHIFT
Shifts the image of the data for three-hole paper, binding,
finishing, and edgemarking. Specifies that the entire content of
the page will be shifted, and the amount and direction of the
shift.
Image shift is the shifting of the image data (system page)
relative to the physical page. This shifting is vertical for
landscape pages and horizontal for portrait.
Syntax OUTPUT SHIFT = {YES | NO | (v
1
, v
2
)}
Table 4-71. OUTPUT SF2FUNCTION parameter options and definitions
Option Definition
YES Instructs the finisher to initiate the user-defined SF2 Finishing Function on the
current sheet.
NO Specifies that Finishing Function SF2 will not be implemented on the current
sheet.