Avidia alarm manager, Configuring avidia system information – ADC AVIDIA SWD4573I1 User Manual
Page 95

Chapter 3: Applications and Configuration Overview
Avidia System Configuration and Management User Manual
69
A
VIDIA
A
LARM
M
ANAGER
An Alarm Manager stores all the alarm information for the entire system. The alarm manager is
stored on the management card, however each individual card installed in the system also stores
alarm information for its own ports. If you replace the management card, the new management
card retrieves the current alarm information from the individual cards to build a new alarm
database.
C
ONFIGURING
A
VIDIA
S
YSTEM
I
NFORMATION
To enable access to the Avidia Web Interface, you must first configure the management card IP
address and subnet mask using the command-line interface. To simplify network management,
you should also configure:
•
system identification information
•
trap generation
•
boot file information
•
system date and time
•
default gateway
•
trap receivers
•
community strings (only configurable using the command-line interface)