ADC AVIDIA SWD4573I1 - Manual (Page 414)

Configuring ADSL Alarm Profiles
388 Avidia System Configuration and Management User Manual
Deleting ADSL Line Profiles
1 In the ADSL Line Profile Table window, locate the table row that contains the ADSL line
configuration profile you want to delete.
Click and if necessary to view the entire table. displays the beginning of the
table. displays the next page of the table.
2 Select the Delete check box next to the row that contains the profile you want to delete. To
select the Delete check box for all rows (except the default profile, which cannot be
deleted), click Check All .
If you decide not to delete a selected row, clear the Delete check box next to the row. Click
Clear All to clear the Delete check box for all rows.
3 Click Delete Checked Row(s) to delete the profiles.
A confirmation dialog displays.
4 Click OK to delete the selected table rows, otherwise click Cancel .
C
ONFIGURING
ADSL A
LARM
P
ROFILES
ADSL alarm profiles determine the conditions that generate SNMP traps. When the configured
thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).
Only one trap is sent for each 15-minute data collection period. You assign alarm profiles to
ADSL ports during port configuration. A default profile exists with an index of 1. You cannot
delete the default profile.
To configure an ADSL alarm profile:
1 Open the ADSL Port Configuration window (see “Configuring ADSL Service” on page 391 ).
2 Click the Alarm Profile Browse button.
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.