ADC AVIDIA SWD4573I1 - Manual (Page 319)

Chapter 13: Monitoring Network Connections
Avidia System Configuration and Management User Manual 293
ATM PVPC Connection Statistics
You can monitor the number of cells transmitted and received, the number of nonconforming
cells, and the number of discarded cells for each active PVPC. Two entries display for each
configured PVPC—each end of the connection is a separate table entry.
Monitoring ATM PVPC Connection Statistics
You monitor ATM PVPC connection statistics using the command-line interface from the
::vpl=> prompt. From the ::root=> prompt, type the following command then press
to display the ::vpl=> prompt.
display stats vpl
From the ::vpl=> prompt, type show then press
Information Description
Index The PVCC Connection Statistics Table row index number.
Port The slot and port on which the PVCC is configured.
VPI
VCI The PVCC VPI and VCI.
In Cells The number of cells received, represented in hexidecimal format.
Out Cells The number of cells transmitted, represented in hexidecimal format.
Non Conforming The number of received cells that do not conform to the configured traffic contract,
represented in hexidecimal format. This statistic is captured whether policing is
enabled or not.
Discard Cells The number of received cells that were discarded as they did not conform to the
configured traffic contract, represented in hexadecimal format. This statistic is
captured only if policing is enabled for this PVCC.
ENTER
ENTER