Configuring sdsl frame line profiles, Configuring sdsl frame line, Sdsl f – ADC AVIDIA SWD4573I1 User Manual
Page 419: Onfiguring, Rame, Rofiles
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
393
6
If handshaking is set to
g.hs
, use the
LineCode
column to set the line code, either
g.lite
or
g.dmt
.
7
Do one of the following:
•
Click
Set
to activate the new settings.
•
Click
Get
to cancel the new settings. You can only cancel the settings if you have not
clicked
Set
.
•
In the
Slot
box select the slot number to configure ports on another card.
C
ONFIGURING
SDSL F
RAME
L
INE
P
ROFILES
SDSL line profiles contain a preconfigured set of parameters, which include the rate adaptation
mode and transmit rate. You assign SDSL line profiles to ports during port configuration. A
default profile exists with an index of 1. You cannot delete the default profile.
To configure an SDSL line profile:
1
Open the
SDSL Port Configuration
window (see
“Configuring SDSL Frame Service” on
2
Click the
Line Profile
Browse
button.
The
SDSL Line Profile Table
window displays the configured SDSL line profiles. Click
and
if necessary to view the entire table.
displays the beginning of the table.
displays
the next page of the table.