ADC AVIDIA SWD4573I1 User Manual
Page 525
Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual
499
To modify RIP information:
1
In the
RIP Configuration Table
window, click
.
The
Modify RIP Configuration
window opens.
2
To modify the Send mode in the
Send
box select the desired setting (
Do Not Send
,
RIP Version
1
,
RIP1 Compatible
,
RIP Version 2
).
3
To modify the Receive mode, in the
Receive
box select the desire setting (
RIP 1
,
RIP 2
,
RIP
1 or RIP 2
,
Do Not Receive
).
4
To modify the hop count, in the
Hop Count
box type the number of hops the packets are
allowed to cross before arriving at their destination.
5
To modify the authentication type, in the
Authentication Type
box, select the desired setting
(
No Authentication
or
Simple Password
). You can only set the authentication type to
Simple
Password
if you are using a
Send
or
Receive
mode that supports RIP 2.
The authentication type determines whether a password is required for the router to learn
information from the session ports in the same network segment.
6
If you selected
No Authentication
in
, go to