ADC AVIDIA SWD4573I1 User Manual
Page 347
Chapter 15: Monitoring Physical Interfaces
Avidia System Configuration and Management User Manual
321
The following screen illustrates examples of both ds1 interfaces commands.
The following table describes the information displayed after you type a ds1 interface
command.
Column
Description
Port
The slot and port for which the information is displayed.
Speed
The current interface bandwidth in bits per second.
Admin Status
The configured state of the interface. Options:
•
Up
—
The interface is activated.
•
Down
—
The interface is deactivated.
Oper Status
The current operational state of the interface. Options:
•
Up
—
The interface is operational and ready to receive packets.
•
Down
—
The interface is not operational.
LinkUpDown TrapEnable
Indicates whether trap generation is enabled or disabled.
High Speed
The current speed, in Mbps. This value is rounded to the nearest of
the following values:
•
2
•
6
•
8
Connector Present
Whether the physical connector is present or not. True indicates the
connector is present. False indicates the connector is absent.
::interfaces=>ds1 4.3
Admin
Oper
LinkUpDown
High
Connector
Port
Speed
Status
Status
TrapEnable
Speed Present
4.3
1544000
up
up
enabled
2
true
::interfaces=>ds1
Admin
Oper
LinkUpDown
High
Connector
Port
Speed
Status
Status
TrapEnable
Speed Present
4.1
1544000
up
up
enabled
2
true
4.2
1544000
up
down
enabled
2
true
4.3
1544000
up
up
enabled
2
true
4.4
1544000
up
dormant
enabled
2
true