ADC AVIDIA SWD4573I1 - Manual (Page 261)

Chapter 10: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 235
Deleting Sessions
1 From the ::session=> prompt, type show then press to display the configured
sessions.
2 Note the index number of the Session Configuration Table row you want to delete.
3 Type the delete command in the following format then press .
delete
Parameter
The Session Configuration Table row index number of the session you want to delete.
Example
::session=> delete 2
C
ONFIGURING
IP R
OUTING
The IP Routing Table contains the information that is used by the management card to route
data. Packets for which the network portion of the destination IP address match the IP address
listed in the first column of the table are routed based on the data displayed in the corresponding
table row.
You configure IP routing from the ::routingtb=> prompt. From the ::root=> prompt,
type the following command then press to display the ::routingtb=> prompt.
configuration routing routingtb
ENTER
ENTER
ENTER