ADC AVIDIA SWD4573I1 - Manual (Page 223)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 197
The line card slot and port to which you want to route the traffic when the current line card
fails.
[-admin (active|inactive)]
The administrative status of the routing table entry. Type -admin active to activate it
or type -admin inactive to deactivate it.
Example
::route=> new 39:26:34:34:75:85:11:08 5 12.1 -admin active
Displaying ATM Routing Table Entries
From the ::route=> prompt, type the show command in the following format, then press
.
show []
Parameter
[]
(Optional) The slot and port for which you want to display ATM routing information.
Omitting this parameter displays the entire ATM Routing Table.
ENTER