ADC AVIDIA SWD4573I1 User Manual
Page 450
Configuring DS3 Service
424
Avidia System Configuration and Management User Manual
The
DS3 Configuration
window displays the following status information that cannot be
changed.
3
In the
LBO
box, select the line length (
0 to 225 feet
(68.58 m) or
225+ feet
).
4
In the
Framing
box, select the type of line connected to the selected port (
M23
or
CbitParity
).
CbitParity is not currently supported.
5
In the
Transmit Clock Source
box, select the type of timing in use (
loopTiming or
localTiming
).
6
Use the Loopback box to initiate a communication path loopback for the port. See
“Initiating Communication Path Loopbacks” on page 563
Information
Descriptions
Card Description
Slot
Port
The slot number, port number and description of the selected card.
Oper Status
The current operational status of the selected port.
•
Up indicates the port is operational and passing data.
•
Down indicates that the port is not operational.
Elapsed Time
The number of seconds that have elapsed since the current 15-minute
data collection period began.
Valid Intervals
The number of 15-minute data collection intervals supported. The Avidia
system supports 96 intervals, or 24 hours, of data collection.
Invalid Intervals
The Avidia system does not have invalid intervals, therefore
0
displays.
Send Code
The type of data currently being transmitted. Currently, only
SendNoCode is supported, indicating that the line is sending looped or
normal data.
Line Status
The status of the line interface. Options:
•
dsx3NoAlarm—No alarms are present.
•
dsx3RcvRAIFailure—Receiving a remote alarm indication.
•
dsx3XmitRAIAlarm—Transmitting a remote alarm indication.
•
dsx3RcvAIS—Receiving an AIS.
•
dsx3XmitAIS—Transmitting an AIS.
•
dsx3LOF—Receiving a loss-of-frame error.
•
dsx3LOS—Receiving a loss-of-signal error.
Last Line Status Change
The time and date of the last line status change.
Loopback Status
The type of physical layer loopback in effect. See
Communication Path Loopbacks” on page 563
for information about
loopbacks.