ADC AVIDIA SWD4573I1 - Manual (Page 221)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 195
Parameters
The SPVC channel card slot and port (format slot.port).
The VPI of the VCC between the CPE and the line card.
The VCI of the VCC between the CPE and the line card.
Example
::spvc=> delete 4.3 100 100
Restarting SPVCs
You can manually attempt to restart an SPVC that is not operational. From the appropriate
::spvc=> prompt, type the restart command in the following format, then press .
restart
Parameters
The SPVC channel card slot and port (format slot.port).
The VPI of the VCC between the CPE and the line card.
The VCI of the VCC between the CPE and the line card.
Example
::spvc=> restart 4.3 100 100
ENTER