ADC AVIDIA SWD4573I1 - Manual (Page 315)

Chapter 13: Monitoring Network Connections
Avidia System Configuration and Management User Manual 289
M
ONITORING
DS3 P
ERFORMANCE
You can monitor DS3 current performance and performance history, by port or for all ports at
once. You monitor DS3 performance from the
::stats=> prompt. From the ::root=>
prompt, type the following command then press to display the ::stats=> prompt.
display stats
Type the ds3 command in the following format, then press .
ds3 [ [-interval (number>|all>)]]
Parameter
[]
The port for which you want to view performance (format slot.port).
[-interval (|all)]
(|all)
The number of the 15-minute data collection interval for which the performance data
is displayed. Type
-interval all to display performance data for all intervals in
the past 24 hours. Omitting this parameter displays the current and 24-hour DS3
performance data for the specified port. You cannot specify this parameter unless you
specified a value for the
parameter.
Omitting both the port and -interval commands displays current and 24-hour DS3 performance
data for all ports.
ENTER
ENTER