Configuring idsl line profiles, Idsl l, Onfiguring – ADC AVIDIA SWD4573I1 User Manual
Page 432: Rofiles
Configuring IDSL Line Profiles
406
Avidia System Configuration and Management User Manual
4
In the
Alarm Profile
boxes, type the desired alarm profile index for each port you want to
configure.
Click the
Alarm Profile Browse
button
to display the configured profiles. If the desired profile
is not yet configured, you can configure it now. See
for instructions.
5
Do one of the following:
•
Click
Set
to activate the new settings.
•
Click
Get
to cancel the new settings. You can only cancel the settings if you have not
clicked
Set
.
•
In the
Slot
box select the slot number to configure ports on another card.
C
ONFIGURING
IDSL L
INE
P
ROFILES
IDSL line profiles contain a preconfigured set of parameters, including the transmit rate,
performance monitoring mode, and SES (severely errored second) threshold. You assign line
profiles to IDSL ports during port configuration. A default profile exists with an index of 1. You
cannot delete the default profile.
To configure an IDSL line profile:
1
Open the
IDSL Port Configuration
window (see
“Configuring IDSL Service” on page 411
).
2
Click the
Line Profile Browse
button.
The
IDSL Line Profile Table
window displays the configured IDSL line profiles. Click
and
if necessary to view the entire table.
displays the beginning of the table.
displays
the next page of the table.