Displaying trap receivers, Deleting trap receivers – ADC AVIDIA SWD4573I1 User Manual
Page 122
Configuring Trap Receivers
96
Avidia System Configuration and Management User Manual
Displaying Trap Receivers
To verify your trap receiver configuration, from the
::trap=>
prompt, type
show
then press
. A screen similar to the following displays.
Deleting Trap Receivers
1
From the
::trap=>
prompt, type
show
then press
to display the configured trap
receivers.
2
Note the index number of the trap receiver you want to delete.
3
Type the delete command in the following format then press
.
delete
Parameter
The trap receiver table index number of the trap receiver you want to delete.
Example
::trap=> delete 2
ENTER
::trap=> show
Index
Network Address
Subnet Mask
Community
Version
1
90.0.0.5
255.255.255.0
public
SNMPv1
2
90.0.0.6
255.255.255.0
private
SNMPv2c
ENTER
ENTER