ADC AVIDIA SWD4573I1 - Manual (Page 502)

Modifying a Frame Relay Configuration
476 Avidia System Configuration and Management User Manual
3 To modify the administrative status, in the Admin Status box select the desired setting ( Up to
activate the frame channel card and line card connection or Down to deactivate it).
4 In the Data Link row, unless LMI Type is set to None you can do the following:
a To modify the poll interval value, in the Poll Interval box type the value in seconds. The
valid range is 5 to 30, with 10 as the default.
b To modify the inquiry interval value, in the Inquiry Interval box type the value. The valid
range is 1 to 255, with 6 as the default.
c To modify the error threshold, in the Error Threshold box type the value. The valid range
is 1 to 10, with 3 as the default.
d To modify the monitor events value, in the Monitor Events box type the value. The valid
range is 1 to 10, with 4 as the default.
5 If Interworking FRF.5 displays, you can do the following:
a To modify the Rx LP mode, in the Rx LP Mode box select the desired setting ( 1 or 2 ).
b To modify the Tx LP mode, in the Tx LP Mode box select the desired setting ( 1 or 2 ).
c To modify the CLP mask, in the CLP Mask box select the mask used when Tx LP Mode
is set to 2 ( 0 or 1 ).