ADC AVIDIA SWD4573I1 - Manual (Page 210)

Configuring PVCCs
184 Avidia System Configuration and Management User Manual
Parameters
The index number of the PVCC you want to delete.
[-backup]
(Optional) Type -backup to delete the backup PVCC associated with the primary PVCC
and leave the primary PVCC configuration in place. Omitting this parameter deletes both
the primary PVCC and any configured backup PVCC.
Examples
::pvcc=> delete 2 -backup
::pvcc=> delete 2
Deleting Mismatched Internal Frame Channel Card PVCCs
When you delete frame channel card PVCCs, mapping information stored in the internal PVCC
tables may not automatically be deleted. This results in mismatched PVCCs, or PVCCs for
which the mapping data is not consistent across all PVCC tables. Therefore, after deleting frame
channel PVCCs, you should check for mismatched internal PVCCs and delete them.
1 From the ::root=> prompt, type the following command then press to display
the ::vcl=> prompt.
configuration atm vcl
2 From the ::vcl=> prompt, type show then press to display the mismatched
internal PVCCs.
Before deleting mismatched PVCCs, be sure they are not a result of a card
being temporarily removed. Once the card is replaced, the PVCC data will no
longer be mismatched.
ENTER
ENTER
::vcl=> show
ifIndex VPI VCI
65665 0 213
65729 0 1027