ADC AVIDIA SWD4573I1 - Manual (Page 596)

Detecting Network Devices
570 Avidia System Configuration and Management User Manual
4 In the IDSL Diagnostic window, you can do any of the following:
• Click Set to activate the new settings.
• Click Get to cancel the new settings. You can only cancel the settings if you have not
clicked Set .
• In the Slot box, select another slot to manage.
D
ETECTING
N
ETWORK
D
EVICES
Use the Ping window to detect whether a network device is online. When you issue a Ping
command, an IP packet is sent to the requested remote device. If the target device receives the
packet, it sends a reply back to the Avidia system, indicating that the target is online.
1 Do one of the following to open the Ping window:
• In the Site Map Navigation window, click Ping .
• In the Tree Navigation window, click Diagnostics Management , PING .
2 In the Destination IP box, type the IP address of the network device you want to detect, in
xxx.xxx.xxx.xxx format.
3 Set the Packets Requested box to the number of ping packets to be sent to the remote address,
one of the following: 1 , 3 , 5 , 10 , or 20 .