ADC AVIDIA SWD4573I1 - Manual (Page 133)

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 107
C
ONFIGURING
ADSL H
ANDSHAKING
The ADSL handshaking and line code parameters provide compatibility with a wide range of
modems. The selected handshaking protocol determines the line code options available:
• If handshaking is set to t1.413, the line code is automatically set to t1.413
• If handshaking is set to g.hs, set the line code to g.lite or g.dmt.
You configure the ADSL handshaking and line code from the ::handshake=> prompt. From
the ::root=> prompt, type the following command then press to display the
::handshake=> prompt.
configuration adsl handshake
Setting Handshaking Parameters
From the ::handshake=> prompt, type the set command in the following format then
press .
set (g.hs|t1.413) [-force (g.lite|g.dmt)]
Parameters
(g.hs|t1.413)
The handshaking mode for the port, either g.hs or t1.413.
[-force (g.lite|g.dmt)]
The line code setting for the port, either g.lite or g.dmt.
Example
set 5.1 g.hs -force g.lite
ENTER
ENTER