ADC AVIDIA SWD4573I1 - Manual (Page 265)

Chapter 10: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 239
Deleting IP Routing Table Entries
1 From the ::routingtb=> prompt, type show then press to display the
configured sessions.
2 Note the index number of the IP Routing Table entry you want to delete.
3 Type the delete command in the following format then press .
delete
Parameter
The IP Routing Table index number of the entry you want to delete.
Example
::routingtb=> delete 2
C
ONFIGURING
IP ARP
The IP ARP Table maps MAC addresses to IP addresses. The router builds this table by sending
ARP requests to the destination IP addresses and learning the corresponding MAC addresses
from the received responses. You can also enter information manually into the IP ARP Table.
You configure IP ARP from the ::arptb=> prompt. From the ::root=> prompt, type the
following command then press to display the ::arptb=> prompt.
configuration routing arptb
ENTER
ENTER
ENTER