ADC AVIDIA SWD4573I1 User Manual
Page 446
Configuring DS1 Service
420
Avidia System Configuration and Management User Manual
The
DS1 Configuration
window displays the following status information that cannot be
changed.
Information
Descriptions
Card Description
Slot
Port
The slot number, port number and description of the selected
card.
Oper Status
The current operational status of the selected port.
•
Up indicates the port is operational and passing data.
•
Down indicates that the port is not operational.
Elapsed Time
The number of seconds that have elapsed since the current
15-minute data collection period began.
Valid Intervals
The number of 15-minute data collection intervals supported.
The Avidia system supports 96 intervals, or 24 hours, of data
collection.
Invalid Intervals
The Avidia system does not have invalid intervals, therefore
0
displays.
Line Status
The status of the line interface. Options:
•
dsx1NoAlarm—No alarm is present.
•
dsx1RcvFarEndLOF—Remote loss of frame alarm.
•
dsx1RcvAIS—Remote AIS.
•
dsx1LossOfFrame—Local loss of frame alarm.
•
dsx1LossOfSignal—Local loss of signal alarm.
Last Line Status Change
The time at which the line entered its current status (see the
Line Status description above for a definition of line status).
Send Code
The type of data currently being transmitted. Currently, the only
data type supported is sending Looped or normal data.
Facilities Data Link
This parameter is not currently supported, therefore
dsx1FdlNone displays. Facilities Data Link is a protocol that
enables communication with the remote device when in ESF
mode.
Loopback Status
The type of physical layer loopback in effect. See
Communication Path Loopbacks” on page 563
for information
about loopbacks.