Configuring adsl service, Adding adsl port configurations, Adsl s – ADC AVIDIA SWD4573I1 User Manual
Page 135: Onfiguring, Ervice
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
109
C
ONFIGURING
ADSL S
ERVICE
Before configuring an ADSL port, make sure you have:
You configure ADSL channels from the
::adsl=>
prompt. From the
::root=>
prompt,
type the following command then press
to display the
::adsl=>
prompt.
configuration adsl
Adding ADSL Port Configurations
Each ADSL port is automatically assigned a default configuration. The default profile index
number for each adsl profile type is 1. This procedure describes how to modify the configuration
to reflect the desired service.
1
From the
::adsl=>
prompt, type the following command then press
to display
the
::line=>
prompt.
profile line
2
Type
show
then press
to display the configured line profiles.
3
Note the index number of the line profile you want to assign to the channel.
4
Type the following command then press
to display the
::alarm=>
prompt.
configuration adsl profile alarm
5
Type
show
then press
to display the configured alarm profiles.
6
Note the index number of the alarm profile you want to assign to the channel.
7
Type the following command then press
to display the
::adsl=>
prompt.
configuration adsl
8
Type the set command in the following format then press
.
set
Set up the desired ADSL line profile (see
“Adding ADSL Line Profiles” on page 100
for
instructions).
Set up the desired ADSL alarm profile (see
“Adding ADSL Alarm Profiles” on page 104
for instructions).
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER