ADC AVIDIA SWD4573I1 - Manual (Page 216)

Configuring SPVCs
190 Avidia System Configuration and Management User Manual
Example
::spvc=> new 4.3 100 100 39:26:34:34:75:85:11:08 -txtraf 3
-rxtraf 4 -interval 100 -retrynumber 50 -admin up
Changing SPVC Admin Status
From the appropriate ::spvc=> prompt, type the admin command in the following format,
then press .
admin <(up|down)>
Parameters
The SPVC channel card slot and port (format slot.port).
The VPI of the VCC between the CPE and the line card.
The VCI of the VCC between the CPE and the line card.
<(up|down)>
Type up to activate the SPVC, or type down to deactivate it.
Example
::spvc=>admin 4.3 100 100 up
ENTER