ADC AVIDIA SWD4573I1 - Manual (Page 392)

Rebooting Cards
366 Avidia System Configuration and Management User Manual
A screen similar to the following displays.
R
EBOOTING
C
ARDS
You can reboot an individual card, or the entire Avidia system, two different ways:
• Perform a cold boot by recycling power to the system. This reinitializes the card memory,
including resetting the system log. If you do not want to lose the data stored in the system
log, do not perform a cold boot.
• Perform a warm boot as described in the following sections. The data stored in the system
log is retained.
You can reboot cards from the ::admin=> prompt. From the ::root=> prompt, type
admin then press to display the ::admin=> prompt.
Rebooting the System
1 To reboot the entire system, from the ::admin=> prompt type the reboot command in the
following format then press .
reboot [-y]
The system displays:
Reboot System?
2 Type to reboot the system, or type to cancel this procedure.
Information Description
Port The SDSL frame port to which the modem is attached.
VerNo The SDSL frame modem software version number.
::frame=>
SDSL Modem (CPE)
Port Version
4.1 0
4.2 24
4.3 0
4.4 0
4.5 24
ENTER
ENTER
Y N