ADC AVIDIA SWD4573I1 - Manual (Page 165)

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 139
Deleting Subscriber Names
From the ::service=> prompt, type the delete command in the following format then press
.
delete
Parameter
The port for which you want to delete a subscriber name (format slot.port).
Example
::service=> delete 4.1
Displaying Subscriber Names
From the ::service=> prompt, type the show command in the following format then press
.
show []
Parameter
The port for which you want to display a subscriber name (format slot.port). Omitting this
parameter displays the configured subscriber names for all SDSL ports.
The following screen illustrates an example of both show service commands. All frame channel
card ports are automatically configured for Transparent LAN Service (TLS).
ENTER
ENTER
::service=> show
Port
Subscriber_Name Service_Type
4.1 Company A TLS
4.2 Company B TLS
::service=> show 4.1
4.1
Company A TLS