ADC AVIDIA SWD4573I1 - Manual (Page 151)

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 125
Adding SDSL Cell Port Configurations
Each SDSL cell port is automatically assigned a default configuration. The default profile index
number for each SDSL cell profile type is 1. This procedure describes how to modify the
configuration to reflect the desired service.
1 From the ::cell=> prompt, type the following command then press to display
the ::line=> prompt.
profile line
2 Type show then press to display the configured line profiles.
3 Note the index number of the line profile you want to assign to the channel.
4 Type the following command then press to display the ::alarm=> prompt.
configuration sdsl cell profile alarm
5 Type show then press to display the configured alarm profiles.
6 Note the index number of the alarm profile you want to assign to the channel.
7 Type the following command then press to display the ::cell=> prompt.
configuration sdsl cell
8 Type the set command in the following format then press .
set (up|down)
[-scramble (enable|disable)]
Parameters
The channel slot and port number (format slot.port).
The index number of the line profile you want to assign to this channel.
The index number of the alarm profile you want to assign to this channel.
(up|down)
The administrative status of the line: Up activates the port. Down deactivates the port.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER