ADC AVIDIA SWD4573I1 - Manual (Page 257)

Chapter 10: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 231
Parameters
The index number of the Session Configuration Table row that contains the session you
want to modify.
[-admin (up|down)]
The admin status of the session. Up enables the session. Down disables the session.
[-subs ]
A name that identifies the session. This is a text string that can be any length and can
contain any character.
[-service (bridge|{{route|broute} [-ipaddr -mask
]}|none)]
bridge
Configures the session for bridging only.
route
Configures the session for routing only.
broute
Configures the session for both bridging and routing.
-ipaddr
The IP address assigned to the session (format xxx.xxx.xxx.xxx). Include this parameter
only if you specified
route or broute for the service type.
-mask
The subnet mask assigned to the session (format xxx.xxx.xxx.xxx). Include this
parameter only if you specified
route or broute for the service type.
none
Assigns no service to the session.