ADC AVIDIA SWD4573I1 - Manual (Page 217)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 191
Displaying SPVCs
From the ::spvc=> prompt, type the show command in the following format, then press
.
show [ [ []]]
Parameters
[]
(Optional) The slot and port for which you want to display SPVC information (format
slot.port). Omitting this parameter displays all configured SPVC information for the
system.
[]
(Optional) The specific VPI for which you want to display all configured SPVC
information. Omitting this parameter displays SPVC information for all VPIs.
[]
(Optional) The specific VCI for which you want to display all configured SPVC
information. Omitting this parameter displays SPVC information for all VCIs.
ENTER