Resetting cards, Esetting, Ards – ADC AVIDIA SWD4573I1 User Manual
Page 615
Chapter 29: System
Maintenance
and Administration
Avidia System Configuration and Management User Manual
589
R
ESETTING
C
ARDS
You can reboot an individual card, or the entire Avidia system, two different ways:
•
Perform a cold boot by recycling power to the system. This reinitializes the card memory,
including resetting the system log. If you do not want to lose the data stored in the system
log, do not perform a cold boot.
•
Perform a warm boot as described in the following sections. The data stored in the system
log is retained.
1
Do one of the following to display the
Reset Card
window:
•
In the
Site Map Navigation
window, click
Reset Card
.
•
In the
Tree Navigation
window, click
System Maintenance
,
Reset Card
.
2
In the
Card
box, select the card you want to reset. To reset the entire system, reset the cards
in the following order:
a
Channel cards (ADSL, SDSL, T1)
b
Line cards (OC3, DS1, DS3)
c
Management card
3
Do one of the following:
•
Click
Reset
to reset the card, then in the confirmation box click
Back
.
•
Click
Cancel
to close the
Reset Card
window without resetting the card.