Modifying idsl port configurations – ADC AVIDIA SWD4573I1 User Manual
Page 161
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
135
Example
::clock=> show 5
The following screen illustrates an example of the show clock command.
Modifying IDSL Port Configurations
Each IDSL port is automatically assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1
You configure IDSL ports from the
::idsl=>
prompt. From the
::root=>
prompt,
type the following command then press
to display the
::idsl=>
prompt.
configuration idsl
2
From the
::idsl=>
prompt, type the following command then press
to display
the
::line=>
prompt.
profile line
3
Type
show
then press
to display the configured line profiles.
4
Note the index number of the line profile you want to assign to the channel.
5
Type the following command then press
to display the
::alarm=>
prompt.
configuration idsl profile alarm
6
Type
show
then press
to display the configured alarm profiles.
7
Note the index number of the alarm profile you want to assign to the channel.
8
Type the following command then press
to display the
::idsl=>
prompt.
configuration idsl
9
Type the set command in the following format then press
.
set
::clock=> show 5
IDSL clock source for slot 5: local
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER