Setting the refresh rate, Displaying system inventory, Displaying system inventory” on – ADC AVIDIA SWD4573I1 User Manual
Page 614: Isplaying, Ystem, Nventory
Displaying System Inventory
588
Avidia System Configuration and Management User Manual
Setting the Refresh Rate
The Web interface refresh rate determines the interval at which the data on the performance data
screens is automatically refreshed. When the management card is rebooted, this setting reverts
to the default value of five minutes.
1
In the
User Table
window
Refresh Time (seconds)
box, type the desired refresh rate in
seconds.
The valid range is 5 to 86,400 seconds.
2
Do one of the following:
•
Click
Set
to save the new setting.
•
Click
Get
to cancel the new setting. You can only cancel the new setting if you have
not yet clicked
Set
.
D
ISPLAYING
S
YSTEM
I
NVENTORY
You can display the card description, serial number, hardware version, firmware version and
software version for each card installed in the system.
1
Do one of the following to display the
System Inventory
window:
•
In the
Site Map Navigation
window, click
System Inventory
.
•
In the
Tree Navigation
window, click
System Maintenance
,
System Inventory
.
2
If desired, click
Get
to
refresh the settings with the most current information.