Configuring trap generation status, Onfiguring, Eneration – ADC AVIDIA SWD4573I1 User Manual
Page 120: Tatus
Configuring Trap Generation Status
94
Avidia System Configuration and Management User Manual
C
ONFIGURING
T
RAP
G
ENERATION
S
TATUS
Traps are messages sent from the management card regarding system events, such as alarms.
The Avidia system distinguishes between two types of traps. Agent authentication traps are
generated when the system receives an invalid SNMP community string. (See
for more information on community strings.) General traps are
generated in response to system events such as alarms and configuration changes. You must
specify whether or not you want the system to generate each type of trap.
You configure trap generation status from the
::system=>
prompt. From the
::root=>
prompt, type the following command then press
to display the
::system=>
prompt.
configuration system
Type the trap command in the following format then press
.
trap [-trap (enable|disable)] [-authtrap (enable|disable)]
Parameters
[-trap (enable|disable)]
The trap generation status for general traps. Type
-trap enable
or
-trap disable
.
[-authtrap (enable|disable)]
The trap generation status for agent authentication traps. Type
-authtrap enable
or
-authtrap disable
.
Example
::system=> trap -trap enable -authtrap disable
ENTER
ENTER