ADC AVIDIA SWD4573I1 - Manual (Page 350)

Monitoring OC3 Interfaces
324 Avidia System Configuration and Management User Manual
M
ONITORING
OC3 I
NTERFACES
From the ::interfaces=> prompt, type the oc3 command in the following format, then
press .
oc3 [] [-path]
Parameter
[]
The specific port for which you want to display interface statistics (format slot.port).
Omitting this parameter displays statistics for all OC3 interfaces.
[-path]
Type this parameter when displaying OC3 interfaces to display the SONET Path layer
interface statistics. Omitting this parameter displays interface statistics for the SONET
Medium, Section and Line layers.
Examples
::interfaces=> oc3 12.1
::interfaces=> oc3 12.1 -path
::interfaces=> oc3
The following screen illustrates examples of several port commands.
ENTER
::interfaces=>oc3
Port Speed Admin Status Oper Status In_Octets Out_Octets In_Errors
12.1a 155520000 up up 0 0 0
12.1b 155520000 up up 0 0 0
::interfaces=>oc3 12.1
Port Speed Admin Status Oper Status In_Octets Out_Octets In_Errors
12.1a 155520000 up up 0 0 0
::interfaces=>oc3 12.1 -path
Port Speed Admin Status Oper Status In_Octets Out_Octets In_Errors
12.1a 155520000 up up 0 0 0