Configuring sdsl cell line profiles, Sdsl c, Onfiguring – ADC AVIDIA SWD4573I1 User Manual
Page 425: Rofiles
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
399
4
In the
Alarm Profile
boxes, type the desired alarm profile index for each port you want to
configure.
Click the
Alarm Profile Browse
button display the configured profiles. If the desired profile
is not yet configured, you can configure it now. See
for instructions.
5
Do one of the following:
•
Click
Set
to activate the new settings.
•
Click
Get
to cancel the new settings. You can only cancel the settings if you have not
clicked
Set
.
•
In the
Slot
box select the slot number to configure ports on another card.
C
ONFIGURING
SDSL C
ELL
L
INE
P
ROFILES
SDSL cell line profiles contain a preconfigured set of parameters, including the rate adaptation
mode and the transmit rate. You assign line profiles to SDSL ports during port configuration. A
default profile exists with an index of 1. You cannot delete the default profile.
To configure the SDSL cell line profile:
1
Open the
SDSL Cell Port Configuration
window (see
“Configuring SDSL Cell Service” on
2
Click the
Line Profile Browse
button.
The
SDSL Cell Line Profile Table
window displays the configured SDSL cell line profiles. Click
and
if necessary to view the entire table.
displays the beginning of the table.
displays the next page of the table.