ADC AVIDIA SWD4573I1 - Manual (Page 117)

Chapter 5: Configuring System Parameters
Avidia System Configuration and Management User Manual 91
Displaying System Information
You can display the current system information to verify your configuration. From the
::system=> prompt, type show then press . A screen similar to the following
displays.
C
ONFIGURING
IP A
DDRESSES
You set the system IP address, subnet mask and default gateway (router) to enable
communication with external networks and to enable access to the Web interface. The default
management card IP address is 192.168.0.1.
You can configure the default gateway when you set the system IP address and subnet mask, or
as a separate procedure.
You configure IP addresses from the ::ip=> prompt. From the ::root=> prompt, type the
following command then press to display the ::ip=> prompt.
configuration ip
ENTER
::system=> show
System Name:
System #100
System Contact: John Smith
System Location: Building A
System Description: Avidia
System Up Time (d:h:m:s) 2:3:20:55
AMC Card Ethernet Port MAC Address: 00 20 a7 10 00 52
Agent Trap: disable
Agent Authentication Trap: enable
Boot Server IP Address: 10.0.0.121
Boot File: amc.bin
Boot Mode: nvram
System Time/Date: Fri, Jun 11 2000 10:47:00
ENTER